Bifolds.co.uk © 2008
Site by Memiah Limited

Installing bifold doors is relatively simple compared to other doors (e.g. pocket doors), and generally involves the following steps:

1. Install the top track first and then install the bottom track (some bifold doors may not require a bottom track). If there is a bottom track make sure it’s fitted on the floor directly below the top track
   
   
2. Insert the bottom pivot point into the bottom track socket and then insert the top pivot point into the top track socket. Retract the pivot point (the top pivot point is usually spring loaded), place it in position and then release it.
   
   
3. Position both the upper and lower sliding guides in the track channel and then space the panels evenly, fitting them to the door opening by adjusting the track sockets.
   
   
4. If you need to raise or lower the panels, adjust the height of the lower pivot pin.